Thanks, Fred.
I switched DIGOUT1 on while on 6m and it remembers to be on, only on
6m. My application will be to control an external relay that will
enable INHIBIT for 6m-eme. As already mentioned, I use BAND0 for this
on 2m and higher transverter bands, but I do not want INHIBIT for
normal 6m use, only to sequence my TR relay and Harris 900w 6m PA,
when using it. Applying RF drive without a load on the Harris can
destroy the amp. One does not want to "hot-switch" the coax relay as
900w courses thru it! So you can add another use for DIGOUT!
I am getting close to "first smoke" with the 6m QRO.
73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ 500 KHz - 10-GHz www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
DUBUS Magazine USA Rep
[hidden email]
======================================
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
