K3 Autonotch Gremlin

[Paul-23]

Using 3.25 I have no autonotch at all. Reverting back to 3.14 I do have
autonotch. The improvement in NR effectiveness is quite positive..... 73,
Paul NN5G
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Barry Simpson]

I also have an autonotch problem with 3.25. Previously the autonotch zapped
the heterodynes immediately. Now it only partially works slowly and you can
hear a residual heterodyne. It does not seem to work at all on signals less
than S9.

Barry  VK2BJ

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Paul
Sent: 18 August 2009 02:35
To: [hidden email]
Subject: [Elecraft] K3 Autonotch Gremlin

Using 3.25 I have no autonotch at all. Reverting back to 3.14 I do have
autonotch. The improvement in NR effectiveness is quite positive..... 73,
Paul NN5G
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ab2tc]

I do not have this problem. I can only test it with a single tone, but it remains effective even for an S3 signal from the XG1. There is a slight residual but I do not think this has changed from previous versions.

AB2TC - Knut

Barry Simpson wrote

I also have an autonotch problem with 3.25. Previously the autonotch zapped
the heterodynes immediately. Now it only partially works slowly and you can
hear a residual heterodyne. It does not seem to work at all on signals less
than S9.
<snip>