K3 Band Data Information Needed

[Barry Simpson]

I want to interface my K3 with a newly acquired SPE 1.5KFA amplifier using
the band data available on the K3 Aux In/Out socket.

Elecraft refer to the data as Bands 1,2,3 and 0 whereas SPE (and other
manufacturers) call them Bands A,B,C and D.

Please can someone let me know if A,B,C,D = 1,2,3,0 or 0,1,2,3 or some
other sequence.

Thanks

Barry Simpson  VK2BJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[jh3sif]

K3/K3S Owner’s Manual shows Band Outputs data in page 21. I am referring K3S Owner’s manual A1.

73 de JH3SIF, Keith

> 2018/07/20 16:51、Barry Simpson <[hidden email]>のメール:
>
> I want to interface my K3 with a newly acquired SPE 1.5KFA amplifier using
> the band data available on the K3 Aux In/Out socket.
>
> Elecraft refer to the data as Bands 1,2,3 and 0 whereas SPE (and other
> manufacturers) call them Bands A,B,C and D.
>
> Please can someone let me know if A,B,C,D = 1,2,3,0 or 0,1,2,3 or some
> other sequence.
>
> Thanks
>
> Barry Simpson  VK2BJ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Clay Autery-2]

You do NOT need to use the band data lines. Please read the SPE 1.5K-FA
manual, et al.  CAT via RS232 works fine/better.

There are also other functions you can use.

Watch this video for what you need to know and a lot more...

https://www.youtube.com/watch?v=Ku8Gyl0amRY

73,

______________________
Clay Autery, KY5G
[phone]

On 20-Jul-18 02:51, Barry Simpson wrote:

> I want to interface my K3 with a newly acquired SPE 1.5KFA amplifier using
> the band data available on the K3 Aux In/Out socket.
>
> Elecraft refer to the data as Bands 1,2,3 and 0 whereas SPE (and other
> manufacturers) call them Bands A,B,C and D.
>
> Please can someone let me know if A,B,C,D = 1,2,3,0 or 0,1,2,3 or some
> other sequence.
>
> Thanks
>
> Barry Simpson  VK2BJ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]