[K3] Band edge misbehavior with RIT or XIT

[Carl Clawson-3]

VK9XM was operating just at the edge of 12 m CW last night and barely
copyable here. I had to use the APF to hear him and my dial frequency was
out of band. "No problem," I thought. I dialed in a few hundred Hz of XIT
to put my transmit frequency in band, but when I keyed I got a band edge
alert from the K3 along with intermittent RF output. Then I turned off XIT,
moved my VFO A in band and used RIT to listen down for him. Same problem. I
finally had to use split but he faded away while I sat lamenting those few
missed attempts to call him.

Of course the fault here was with VK9XM, but this is a (minor) flaw and
ought to be fixed if you get a chance.

73, Carl WS7L
K3 #486
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html