K3 Beta Firmware 4.81 Release

[AI9T]

Anyone have any problems with the new Firmware. I installed the firmware
updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3
after the update. There was some kind of problem with the power output.
For starters I could not adjust the power out while the rig was keyed.
For instance I tried to adjust the power on my KPA500 from 250 watts to
500 and could not adjust it while keying it. If I unkeyed I could raise
the power a bit on the K3, then key back up to see what the AMP output
was, then unkey to adjust again, then key to check again.

I installed the older version of firmware back on the K3 and all was
well again.

--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Tony Scandurra K4QE]

I could not reproduce this problem.

I have the latest firmware (including beta releases) on all of my K-Line
(K3, P3, KPA500, and KAT500).

73, Tony K4QE


On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T <[hidden email]> wrote:

> Anyone have any problems with the new Firmware. I installed the firmware
> updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3
> after the update. There was some kind of problem with the power output. For
> starters I could not adjust the power out while the rig was keyed. For
> instance I tried to adjust the power on my KPA500 from 250 watts to 500 and
> could not adjust it while keying it. If I unkeyed I could raise the power a
> bit on the K3, then key back up to see what the AMP output was, then unkey
> to adjust again, then key to check again.
>
> I installed the older version of firmware back on the K3 and all was well
> again.
>
> --
> 73
>
> Steve AI9T
>
> http://www.ai9t.com
>
> AI9T DX Cluster
>
> Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
> Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html