K3 beta-test firmware revision 3.42 (with DSP rev. 2.37) is now
available. It corrects a problem with CW keying (and possibly transmit
in general) when using HRD (Ham Radio Deluxe) software. See release
notes below.
Please send any problem reports to
[hidden email]. Beta
firmware load instructions can be found at
http://www.elecraft.com/K3/k3_software.htm73,
Wayne
N6KR
* * *
MCU 3.42 / DSP 2.37, 10-10-2009
* POLLING PROBLEM WITH HRD FIXED: With no sub receiver
installed, applications such as HRD (Ham Radio Deluxe)
were still able to continuously poll for the aux DSP
revision number, causing timeouts that could disrupt transmit.
* SQUELCH CAN BE SET FULLY CLOCKWISE: In some cases
rotating the squelch pot fully clockwise would open the squelch.
Full clockwise now closes squelch.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
