K3 CW/MIC problems

[Evert Bakker (PA2KW)]

Hello,

 

This weekend I found some time to connect my Micro-Keyer II to the K3.

After playing around a while with the software (try and error method) I
ended up with an K3 not doing what I want.

I thought that the MKII was causing the problem so I disconnected everything
except the paddle, power-supply, antenna, and microphone.

 

The results are:

1) Only the CW side-tone monitor is there but no output at all and sounds
like running QSK

2) On SSB I do have full output but it looks like if my Mic-Gain and
Compression are both at level "100" if I look to the internal power-meter.

 

I did a quick check on several config items, but didn't see anything
strange.

 

Please has any body a clue?

 

Is it possible to copy all user parameters from one K3 to another (except
calibration parameters off course)?

 

73's, Evert PA2KW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Evert Bakker (PA2KW)]

 

Subject: Re: [Elecraft] K3 CW/MIC problems

 

VOX on ?

 

Problem solved



73's, Evert PA2KW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net <http://www.qsl.net/>
Please help support this email list: http://www.qsl.net/donate.html

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html