Elecraft

[K3] CW PTT

Classic

List

Threaded

6 messages Options

knesbitt

[K3] CW PTT

Sorry if this has been covered, however I was just wondering if someone
could confirm/deny whether the K3 supports PTT cw (essentially MOX in
cw) to be used with external keying/sequencing devices?

73,

Kirb - VE6IV
--
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Ed K1EP

Re: [K3] CW PTT

yes

At 12/17/2007 07:43 PM, Kirb Nesbitt wrote:

>Sorry if this has been covered, however I was just wondering if someone
>could confirm/deny whether the K3 supports PTT cw (essentially MOX in
>cw) to be used with external keying/sequencing devices?
>
>73,
>
>Kirb - VE6IV
>--
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Vic K2VCO

Re: [K3] CW PTT

In reply to this post by knesbitt

Kirb Nesbitt wrote:
> Sorry if this has been covered, however I was just wondering if someone
> could confirm/deny whether the K3 supports PTT cw (essentially MOX in
> cw) to be used with external keying/sequencing devices?

Yes.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
K3 no. 00007
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Don Wilhelm-4

Re: [K3] CW PTT

In reply to this post by knesbitt

Kirb,

If is doesn't presently, it will - that is an important function to many
VHFers and some of those running SO2R.
Currently, PTT does work on CW, but it may or may not inhibit input from
the paddles right now - I have not checked on the progress of this
function with the recent firmware upgrades.

73,
Don W3FPR

Kirb Nesbitt wrote:

> Sorry if this has been covered, however I was just wondering if someone
> could confirm/deny whether the K3 supports PTT cw (essentially MOX in
> cw) to be used with external keying/sequencing devices?
>
> 73,
>
> Kirb - VE6IV
> --
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>

Vic K2VCO

Re: [K3] CW PTT

Don Wilhelm wrote:
> Kirb,
>
> If is doesn't presently, it will - that is an important function to many
> VHFers and some of those running SO2R.
> Currently, PTT does work on CW, but it may or may not inhibit input from
> the paddles right now - I have not checked on the progress of this
> function with the recent firmware upgrades.

It works properly now. At one point there was a bug that hitting the key
enabled tx even when VOX was not on, but this was fixed.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

knesbitt

Re: [K3] CW PTT

Beauty. Thanks guys.
Santa just got another high priority email. Question is, does he have
any pull with Eric and Wayne?

Kirb - VE6IV
--

Vic K2VCO wrote:

> Don Wilhelm wrote:
>> Kirb,
>>
>> If is doesn't presently, it will - that is an important function to
>> many VHFers and some of those running SO2R.
>> Currently, PTT does work on CW, but it may or may not inhibit input
>> from the paddles right now - I have not checked on the progress of
>> this function with the recent firmware upgrades.
>
> It works properly now. At one point there was a bug that hitting the key
> enabled tx even when VOX was not on, but this was fixed.