K3 CW Sidetone

[Keith Lamonica]

  Can the sidetone monitor level be set to a fixed level?  Mine defaults
to 4 when I change modes and then come back to CW.

Keith, W7DXX Remote


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

Keith,

This shouldn't happen. I test this on every firmware release, and just  
tested it again. Enter CW mode, then hold the SPEED/MIC/MON knob in to  
bring up sidetone MON level, then adjust it. Tap the knob to return to  
normal operation. Changing modes and possibly readjusting the MON  
level for that mode should have no effect on the sidetone level.

If this isn't working, please contact k3support on Monday.

73,
Wayne
N6KR


On Sep 26, 2010, at 8:56 AM, Keith Lamonica wrote:

>  Can the sidetone monitor level be set to a fixed level?  Mine  
> defaults
> to 4 when I change modes and then come back to CW.
>
> Keith, W7DXX Remote
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[The Smiths]

Is it also possible that you're turning off your rig by shutting off the power TO the rig without using the Power "off/on" button (I.E. Just turning off the power supply).  I belive that you have to save the settings at least ONE time by doing a proper shut down on the K3, and not just killing power to the rig.  I've found settings get lost if you don't.  Just an idea.
Like a computer, you can't just "Crash" it when you're ready to stop using it.
 

> From: [hidden email]
> To: [hidden email]
> Date: Sun, 26 Sep 2010 09:08:38 -0700
> CC: [hidden email]
> Subject: Re: [Elecraft] K3 CW Sidetone
>
> Keith,
>
> This shouldn't happen. I test this on every firmware release, and just
> tested it again. Enter CW mode, then hold the SPEED/MIC/MON knob in to
> bring up sidetone MON level, then adjust it. Tap the knob to return to
> normal operation. Changing modes and possibly readjusting the MON
> level for that mode should have no effect on the sidetone level.
>
> If this isn't working, please contact k3support on Monday.
>
> 73,
> Wayne
> N6KR
>
>
> On Sep 26, 2010, at 8:56 AM, Keith Lamonica wrote:
>
> > Can the sidetone monitor level be set to a fixed level? Mine
> > defaults
> > to 4 when I change modes and then come back to CW.
> >
> > Keith, W7DXX Remote
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html