K3 CW decode while VFO B is on alternate display

[WD6DBM]

Dear Elecrafters:

Is there a way to make the K3 decode CW even while VFO B is set to an alternate display like PA TEMP?  Mine decodes fine while VFO B is displaying VFO B freq, but not in the other modes.  It seems like it should be able to do this.  If this is a RTFM situation, please accept my apologies and please point me to the right page.  73,  Eric WD6DBM  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Julian, G4ILO]

eric norris wrote

Is there a way to make the K3 decode CW even while VFO B is set to an alternate display like PA TEMP?  Mine decodes fine while VFO B is displaying VFO B freq, but not in the other modes.  It seems like it should be able to do this.  If this is a RTFM situation, please accept my apologies and please point me to the right page.  73,  Eric WD6DBM  

No, you just have to disable the alternate display.