[K3] Changing Power Level

[Roy Morris-6]

I have noticed that my power level sometimes changes from 35 watts (power
level set for amp operation) to 5 watts when I turn on the K3.  When this
happens I have to turn the POWER encoder back up to 35 watts.  The KPA3 and
KAT3 are installed.  PWR SET -NOR and TUNE PWR -NOR in Config.  Could this
be one of the front panel board or RF board connectors not making good
contact?  Roy Morris  W4WFB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[W4GRJ]

I have a Yaesu SP-5 speaker with a built-in LL-5 phone patch.
The instructions show the cabling connected to a FT-1000 which has all the
in and outs for this phone patch.
It is not very clear to me how to connect to the K3. Appreciate if someone
familiar with this could contact me off list.
I can send the connection diagram to you.

Tnxs,
Jack
W4GRJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html