I use the channel hopping capability on 60m and for some SSB nets on
40m. This morning I enabled channel hopping and checked the net
frequencies on 40. Hearing nothing there, I hit A/B to move down to the
CW part of the band. That worked, switching frequencies and mode as
expected. Then I moved VFO A and was surprised that I was channel
hopping back in the SSB part of the band, but in CW mode! Is that the
intended behavior? My expectation was that A/B would cancel channel
hopping. Checking the manual I see that is not documented (tapping RATE
or FINE or changing bands cancels channel hopping according to the
Users' Manual).
73,
Randy, KS4L
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
