K3 Configuration setting to force mode to be Identical A to B

[Bill Lewis]

Is there a simple K3 configuration setting to FORCE the mode associated with
VFO B to track the mode associated with VFO A?

I have found the setting to keep the Bands identical... but after studying
the manual, I cannot find how to keep the modes identical without pushing a
number of buttons each time.

Thanks much...W8NN





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Bill,

Yes there is an easy way.  Simply double tap the A>B button.
The first tap transfers the frequency, but the 2nd tap (within 2
seconds) transfers mode and several other parameters.  You will see A>B
ALL flash briefly in the VFO B display area.

73,
Don W3FPR

On 10/25/2014 6:14 PM, Bill Lewis wrote:
> Is there a simple K3 configuration setting to FORCE the mode associated with
> VFO B to track the mode associated with VFO A?
>
> I have found the setting to keep the Bands identical... but after studying
> the manual, I cannot find how to keep the modes identical without pushing a
> number of buttons each time.
>
> Thanks much...W8NN
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]