K3 DATA A Mode not working

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 DATA A Mode not working

Elecraft mailing list
I recently downloaded a JT65 program and after several days of flawless operation, my K3 stopped transmitting in DATA A mode. The K3 keys but nothing is transmitted and no power out. I changed over to BPSK31 via HRD  using DATA A with the same results. All the other modes (RTTY FSK, CW, SSB) work fine with no issues. Only DATA A seems impacted. I reloaded the Firmware from the website and went through the Configuration tables and that all that appears correct.I must have missed something  someplace so any help would be appreciated.Thanks, Bill-W0BBI 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 DATA A Mode not working

Barry K3NDM
Bill,
     Make sure the JT65 program knows to use your sound card for in and
out, and that you have levels set correctly. If there are multiple cards
attached to your computer, you could have inadvertently picked the wrong
one. At some point, all of use will have done that a few times. :-)

73,
Barry
K3NDM

------ Original Message ------
From: "Bill Wiehe via Elecraft" <[hidden email]>
To: "Elecraft Reflector" <[hidden email]>
Sent: 1/9/2017 9:21:02 PM
Subject: [Elecraft] K3 DATA A Mode not working

>I recently downloaded a JT65 program and after several days of flawless
>operation, my K3 stopped transmitting in DATA A mode. The K3 keys but
>nothing is transmitted and no power out. I changed over to BPSK31 via
>HRD  using DATA A with the same results. All the other modes (RTTY FSK,
>CW, SSB) work fine with no issues. Only DATA A seems impacted. I
>reloaded the Firmware from the website and went through the
>Configuration tables and that all that appears correct.I must have
>missed something  someplace so any help would be appreciated.Thanks,
>Bill-W0BBI
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]