K3 DSP Old and New

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 DSP Old and New

Elecraft mailing list
I have an older 2009 K3 without the updated DSP. What is your opinion? Is it worth the upgrade to the newer D version? Anyone done a comparison?
   Doug K6JEY
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

K3 DSP Old and New

Elecraft mailing list
Hello Doug,
If you are not going for a K3S, the update to newer D version is very worthwhile.  It gives great improvement in the audio (though I still consider the audio worse than my new generation Icom radio).
However, Elecraft mentioned in the past that the DSP board currently used in K3S would be offered to K3 user for upgrade.
I would wonder whether you would like to wait for the new K3S DSP board instead.
73
Johnny VR2XMC

      寄件人︰ Doug Millar via Elecraft <[hidden email]>
 收件人︰ "[hidden email]" <[hidden email]>
 傳送日期︰ 2016年09月23日 (週五) 8:20 AM
 主題︰ [Elecraft] K3 DSP Old and New
   
I have an older 2009 K3 without the updated DSP. What is your opinion? Is it worth the upgrade to the newer D version? Anyone done a comparison?
   Doug K6JEY
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 DSP Old and New

Don Wilhelm
In reply to this post by Elecraft mailing list
Doug,

I also have the older DSP board.  I elected to add the Low Pass Filter
add-on-board because I was not interested in the extended low frequency
response.
So the proper answer depends on your aspirations - the low pass filter
does provide a definite advantage in high frequency 'hiss'.

73,
Don W3FPR

On 9/22/2016 8:20 PM, Doug Millar via Elecraft wrote:
> I have an older 2009 K3 without the updated DSP. What is your opinion? Is it worth the upgrade to the newer D version? Anyone done a comparison?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]