K3 DSP

[Barry Simpson]

A silly question no doubt but why does it always say N/A against DSP2 in K3
Utility when it also indicates that for example 01.89 is available ?

 

I await a learned response.

 

73

 

Barry  VK2BJ  K3   1397

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[ayoshida]

It's for KRX3. I have been waiting for arrival !

73
aki  ja1nlx

----- Original Message -----
From: "Barry Simpson" <[hidden email]>
To: "'Elecraft'" <[hidden email]>
Sent: Saturday, August 30, 2008 9:57 AM
Subject: [Elecraft] K3 DSP

>A silly question no doubt but why does it always say N/A against DSP2 in K3
> Utility when it also indicates that for example 01.89 is available ?
>
>
>
> I await a learned response.
>
>
>
> 73
>
>
>
> Barry  VK2BJ  K3   1397
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dick Dievendorff]

If you have the KRX3 option installed and enabled (through the K3's CONFIG
menu) it won't show N/A.

The K3 Utility Help file on the Firmware page says:

Installed in K3

Indicates the firmware versions installed in the K3 for each of these
processors. N/A indicates that the hardware option is not installed or has
not been enabled through the K3 CONFIG menu.

Dick, K6KR





-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Barry Simpson
Sent: Friday, August 29, 2008 5:58 PM
To: 'Elecraft'
Subject: [Elecraft] K3 DSP

A silly question no doubt but why does it always say N/A against DSP2 in K3
Utility when it also indicates that for example 01.89 is available ?

 

I await a learned response.

 

73

 

Barry  VK2BJ  K3   1397

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> ...why does it always say N/A against DSP2 in K3
> Utility when it also indicates that for example 01.89 is available ?

N/A means that the required hardware (in this case the Aux DSP board) is
not installed in the K3, so attempting to program it is N/A (not
applicable).

More accurately, it means the K3 has indicated to K3 Utility that the
required option is not present. It may in fact be present, but not yet
indicated as set in the K3's CONFIG menu, in this case CONFIG:KRX3.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com