K3:DSP upgrade error ERR DSE?

[Craig-89]

Hi

I just finished upgrading my DSP board with new swapped DSP board.

I am getting  the following  error message

E040EA3
ERR DSE

According to manual ERR DSE  is "Missing echo from a DSP command"

I have not  put my old original DSP board back yet to see if it  fixes things.

Anyone perhaps have experience with this problem when doing the upgrade?


73
Craig
VK3HE





     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> I just finished upgrading my DSP board with new swapped DSP board.
>
> I am getting  the following  error message...

Might be due to significantly different versions of MCU and DSP code.  
See if you can update the firmware in the DSP and/or MCU to the latest
and see if the error goes away.

73,

Lyle KK7P
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Craig-89]

Hi Lyle

I updated the firmware.  I had to do a MPU load/reset. Anyway all is fine now and everything is working fine.

Thanks for your reply  and help.

73
Craig
VK3HE

--- On Sat, 5/22/10, Lyle Johnson <[hidden email]> wrote:

> From: Lyle Johnson <[hidden email]>
> Subject: Re: [Elecraft] K3:DSP upgrade error ERR DSE?
> To: "Craig" <[hidden email]>
> Cc: [hidden email]
> Date: Saturday, May 22, 2010, 10:16 PM
>
> > I just finished upgrading my DSP board with new
> swapped DSP board.
> >
> > I am getting  the following  error
> message...
>
> Might be due to significantly different versions of MCU and
> DSP code.  See if you can update the firmware in the
> DSP and/or MCU to the latest and see if the error goes
> away.
>
> 73,
>
> Lyle KK7P
>

     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html