Fred - Yes to all. Check out the N1MM manual on macros. There's a command that will
allow you to execute a CAT command in the macro...its something like CAT1ASC to send the
command in ascii format. Then look at the K3 programmer's reference guide available for
download on the elecraft website. Look toward the end of the manual where it talks about
Switch commands. There's a table that shows the correct codes. I think the correct
macro to send M1 would be something like {CAT1ASC K31;SWT21;}.
This is from memory so please verify with the references mentioned.
-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 13 14:27 , Fred Jensen sent:
>I'm having a hard time making sense out of all this and a couple of the
>questions involve non-Elecraft products, so I turn to the "Fountain of
>Elecraft and Elecraft-Related Knowledge":
>
>1. Is the K3-DVK module controllable via CAT commands [i.e. can I make
>it play its messages via commands on the RS-232 port?]
>
>2. If 1 is "Yes," does anyone know if the N1MM Logger program will send
>those commands when in SSB mode?
>
>3. Can I record the messages using the normal microphone [Heil
>headset/boom mic from E'craft]?
>
>4. Will the playback level match the level from my mic when transmitting?
>
>73,
>
>Fred K6DGW
>Auburn CA
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post:
[hidden email]','','','')">
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
