K3'ers...
When I record messages with the DVR, does the recording use the
TX EQUALIZATION settings, or are these only used when the signal is
actually transmitted?
I have two mics on my radio, and was trying to see how they sounded on
playback.
I setup the rear mic, and made two recordings. I listened and they
sounded good.
Now I reconfigured for the front mic, and began trying to get them to
sound the same. As I was adjusting the TX EQ on the front mic, and
comparing the sound with the recorded rear mic, it seemed that the
recordings were being distorted. I felt that the recordings contained
some TX EQ AND I was hearing it compounded by the current TX EQ for
the front mic.
Does this make any sense.
Help!
...bc nr4c
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
