Ken,
I use DX4WIN with my K3 and I notice the same issue. I do not use PSK31
very often and when I do I have the change the mode manually within DX4WIN.
This is more than likely a DX4WIN issue with the rig control file for the
K3. The software is probably not recognizing the Data A or Data D modes on
the K3 and by default assigns RTTY. N1MM contest software provides a way to
map the modes in the Configurator. I would think some modification of the
rig control file for the K3 is needed in DX4WIN. I would refer this to the
DX4WIN reflector.
Dave, N4QS
----- Original Message -----
From: "ken chandler" <
[hidden email]>
To: <
[hidden email]>
Sent: Saturday, September 11, 2010 4:37 AM
Subject: [Elecraft] K3 DX4Win
> Hi Gang
>
> Anyone using DX4Win with the K3, The MODE in DX4win will not recognize
> PSK31
> on k3 and is defaulting to RTTY mode.
>
> IN DATA MD I am using PSK D.
>
> I have tried changing settings in DATA MD ie data A, on the k3 but no
> change.
>
> In DX4Win I have the mode box ticked for PSK31 RTTY.
>
> I have also un-checked RTTY in dx4win but it still defaults to
> RTTY...weird
> !
>
>
>
> Thanks
>
>
>
> Ken..G0ORH
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
