K3 & DXBase 2007

[W4NU]

My K-3 works fine with DXBase 2007 with one exception. It does not read
the K3's frequency. I am using the Radio.ini file From EI6IZ. Both K3
and DXBase are set at 38400 baud. Any ideas?

I'm using WIN 7, 64 bit & I'm using a USB serial converter on COM3.

73 ,

John, W4NU


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Fred Townsend]

John, if you have a P3 does it report the frequency correctly?

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of John Harden
Sent: Saturday, April 23, 2011 2:13 PM
To: [hidden email]
Subject: [Elecraft] K3 & DXBase 2007

My K-3 works fine with DXBase 2007 with one exception. It does not read the
K3's frequency. I am using the Radio.ini file From EI6IZ. Both K3 and DXBase
are set at 38400 baud. Any ideas?

I'm using WIN 7, 64 bit & I'm using a USB serial converter on COM3.

73 ,

John, W4NU


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Brendan Minish]

Does it set the frequency if you click on a dxspot ?

On 23/04/2011 21:42, Fred Townsend wrote:

> John, if you have a P3 does it report the frequency correctly?
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of John Harden
> Sent: Saturday, April 23, 2011 2:13 PM
> To: [hidden email]
> Subject: [Elecraft] K3&  DXBase 2007
>
> My K-3 works fine with DXBase 2007 with one exception. It does not read the
> K3's frequency. I am using the Radio.ini file From EI6IZ. Both K3 and DXBase
> are set at 38400 baud. Any ideas?
>
> I'm using WIN 7, 64 bit&  I'm using a USB serial converter on COM3.
>
> 73 ,
>
> John, W4NU
>

--
73
Brendan EI6IZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[n7ws]

Tools-->Options-->User Options-->Log Defaults-->Load Band/Mode from HF Transceiver is checked, right?

--- On Sat, 4/23/11, John Harden <[hidden email]> wrote:

> From: John Harden <[hidden email]>
> Subject: [Elecraft] K3 & DXBase 2007
> To: [hidden email]
> Date: Saturday, April 23, 2011, 3:13 PM
> My K-3 works fine with DXBase 2007
> with one exception. It does not read
> the K3's frequency. I am using the Radio.ini file From
> EI6IZ. Both K3
> and DXBase are set at 38400 baud. Any ideas?
>
> I'm using WIN 7, 64 bit & I'm using a USB serial
> converter on COM3.
>
> 73 ,
>
> John, W4NU

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html