|
How would I set up the K3 in diversity mode with two different RX only
antennas? One to the RX antenna and one to the AUX RF? Would going into diversity mode with that setup get me one RX antenna in one ear and the other RX antenna in the other? 73, Ken, K6LA / VY2TT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Ken,
Yes, that is how you would set it up - you need to select RX ANT for both the ain and the SUB. And yes, you hear what is on the main in one ear and what is on the SubRX in the other ear (unless you mix them with the L-MIX-R settings in the CONFIG menu). 73, Don W3FPR On 5/22/2014 6:05 AM, Ken Widelitz wrote: > How would I set up the K3 in diversity mode with two different RX only > antennas? One to the RX antenna and one to the AUX RF? Would going into > diversity mode with that setup get me one RX antenna in one ear and the > other RX antenna in the other? > > > > 73, Ken, K6LA / VY2TT > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Ken Widelitz
Ken,
Yes, that is exactly the way to do it, and that still allows you to transmit through the main antenna. So in other words, you would select "RX ANT" for the main receiver, and be sure to select the AUX input for the sub-receiver (while "b SET" is engaged, tap the "ANT" button on the K3 to alternate between "MAIN" and "AUX" and be sure you leave it on "AUX".) I operate this way on both 40m and 30m with a Pixel Technologies loop connected to the AUX input, and a small voltage probe RX antenna connected to the RX ANT input of the K3, while using a ground plane vertical as the main transmit antenna. Depending upon the amount of power you're using, and the proximity of the rx antennas to the tx antenna, you may want to consider adding some outboard rx protection. I use the Array Solutions Model AS-RXFEP, and it works very well. 73, Dale WA8SRA > How would I set up the K3 in diversity mode with two different RX only > antennas? One to the RX antenna and one to the AUX RF? Would going into > diversity mode with that setup get me one RX antenna in one ear and the > other RX antenna in the other? > > > > 73, Ken, K6LA / VY2TT > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Don Wilhelm-4
No. You need to select RX ANT on one RX and AUX on the other RX. Otherwise you will hear the same signal in both ears, namely that of the RX ANT input. ;-) 73, Olli - DH8BQA Contest, DX & radio projects: http://www.dh8bqa.de Am 22.05.2014 14:15, schrieb Don Wilhelm: > Ken, > > Yes, that is how you would set it up - you need to select RX ANT for > both the ain and the SUB. And yes, you hear what is on the main in > one ear and what is on the SubRX in the other ear (unless you mix them > with the L-MIX-R settings in the CONFIG menu). > > 73, > Don W3FPR > > On 5/22/2014 6:05 AM, Ken Widelitz wrote: >> How would I set up the K3 in diversity mode with two different RX only >> antennas? One to the RX antenna and one to the AUX RF? Would going into >> diversity mode with that setup get me one RX antenna in one ear and the >> other RX antenna in the other? >> >> >> 73, Ken, K6LA / VY2TT >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
| Free forum by Nabble | Edit this page |
