Elecraft

K3_EZ Installation

Classic

List

Threaded

6 messages Options

Dick Dickinson

K3_EZ Installation

I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
installation process for K3_EZ V8.

I have a zipped file which contains an a setup.exe, K3_EZ.application and a
folder of Application Files. Further inside the Application Files folder is
another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
folder and several .deploy file and one .manifest file.

It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
and precisely what to do with the contents.

What I've done so far seems to yield failure. I do have .NET 2.0 and .NET
3.0 (combined as .NET 3.5, I believe) installed.

Specific instructions will be appreciated.

73,

Dick - KA5KKT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Don Wilhelm

Re: K3_EZ Installation

Dick,

I would recommend you unzip it to a new folder and then run the setup.exe.

73,
Don W3FPR

On 9/30/2018 4:37 PM, Dick Dickinson wrote:

> I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
> installation process for K3_EZ V8.
>
> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
> folder of Application Files. Further inside the Application Files folder is
> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
> folder and several .deploy file and one .manifest file.
>
> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
> and precisely what to do with the contents.
>
> What I've done so far seems to yield failure. I do have .NET 2.0 and .NET
> 3.0 (combined as .NET 3.5, I believe) installed.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: K3_EZ Installation

You may have to right-click the .exe file and run as administrator

Sent from my iPhone

> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <[hidden email]> wrote:
>
> Dick,
>
> I would recommend you unzip it to a new folder and then run the setup.exe.
>
> 73,
> Don W3FPR
>
>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>> I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
>> installation process for K3_EZ V8.
>> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
>> folder of Application Files. Further inside the Application Files folder is
>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
>> folder and several .deploy file and one .manifest file.
>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
>> and precisely what to do with the contents.
>> What I've done so far seems to yield failure. I do have .NET 2.0 and .NET
>> 3.0 (combined as .NET 3.5, I believe) installed.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Rick WA6NHC-2

Re: K3_EZ Installation

I will submit that if this is required by ANY software, that it isn't
packaged correctly. An elevated installer should be used and installing
as admin is generally a really bad idea. There are a few exceptions
only. Install normally, K3_EZ will install correctly.

Rick nhc

On 9/30/2018 4:07 PM, Harlan Sherriff via Elecraft wrote:

> You may have to right-click the .exe file and run as administrator
>
> Sent from my iPhone
>
>> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <[hidden email]> wrote:
>>
>> Dick,
>>
>> I would recommend you unzip it to a new folder and then run the setup.exe.
>>
>> 73,
>> Don W3FPR
>>
>>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>>> I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
>>> installation process for K3_EZ V8.
>>> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
>>> folder of Application Files. Further inside the Application Files folder is
>>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
>>> folder and several .deploy file and one .manifest file.
>>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
>>> and precisely what to do with the contents.
>>> What I've done so far seems to yield failure. I do have .NET 2.0 and .NET
>>> 3.0 (combined as .NET 3.5, I believe) installed.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

N7US

Re: K3_EZ Installation

I noticed some bugs with that version of K3_EZ. I think they were in saving TQ EQ settings, but I don't remember for sure. The 2005 or 2007 versions didn't have those bugs.

I believe the developer is a SK.

Jim N7US

-----Original Message-----

I will submit that if this is required by ANY software, that it isn't packaged correctly. An elevated installer should be used and installing as admin is generally a really bad idea. There are a few exceptions only. Install normally, K3_EZ will install correctly.

Rick nhc

On 9/30/2018 4:07 PM, Harlan Sherriff via Elecraft wrote:

N7US

Re: K3_EZ Installation

Sorry, I meant TX EQ.

Jim N7US

-----Original Message-----

I noticed some bugs with that version of K3_EZ. I think they were in saving
TQ EQ settings, but I don't remember for sure. The 2005 or 2007 versions
didn't have those bugs.

I believe the developer is a SK.

Jim N7US

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]