Looks very useful, but what about a version for the Mac OS? If a version of
K3-EZ for the Mac OS is not in the cards, is there anything out there that
is similarly robust with the K3?
Robert
On 2/6/09 12:00 PM, "
[hidden email]"
<
[hidden email]> wrote:
>
> While exploring the Elecraft site, I discovered K3-EZ Software by Bill
> Coleman.? See it at:
>
>
http://home.roadrunner.com/~n2bc/SW.htm>
> Now, I have no vested interest in the program, but I found it to be quite
> useful and highly recommend it.? I spend some time adjusting the RX equalizer
> and found that it is quite effective to my hearing loss.? It is quite amazing
> how you can bring up the highs and cut out the lows.? I have yet to deal with
> the TX equalizer.? The program seems to give me all the information about the
> K3 I need and allows me to make changes without digging through the menus.?
> Also, it will allow you to load the memories.? Other programs are good too,
> but it seems that Bill's program goes into the depth of the rig more than
> others.
>
> One thing I would recommend to the user is to use a high baud rate than 4800.?
> The program goes out and changes settings and at 4800 baud it can be quite
> slow.
>
> Let me also say, I have about three or four programs on my computer which
> talks with the K3 and they are all good...Bill's seems to go (as I said) into
> the "soul" of the K3
>
> Lee - K0WA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
