Hi Holger,
Try another better connector.
I had this problem with a cheap one and try another one and all was OK
73,
Jorge
CX6VM
-----Mensaje original-----
De:
[hidden email]
[mailto:
[hidden email]] En nombre de Holger Meinecke
Enviado el: Martes, 31 de Agosto de 2010 04:21 p.m.
Para:
[hidden email]
Asunto: [Elecraft] [K3]Err Ptt
Hi elecrafters,
i have the following problem with k3 2121:
I'm using external ptt-in (backside of the K3).
At first rarely in qso the trx didn't go back to rx-mode after sending.
Usually a blind grip at the backside of the k3 into the cableing or an
on /off cycle solved the problem (just moving at the ptt-cable or
connector).
Right now it starts with err-ptt ( without any cableing but 12v ;O) ).
Resistance between ptt and ground is 25 ohms.
Someone had this problem (solved?) before?
I really don't trust this cinch-stuff
Any hints for further investigation ?
Regards from northern germany,
Holger DL6ABM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html