[K3]Err Ptt

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

[K3]Err Ptt

dl6abm
Hi elecrafters,

i have the following problem with k3 2121:

I'm using external ptt-in (backside of the K3).
At first rarely in qso the trx didn't go back to rx-mode after sending.
Usually a blind grip at the backside of the k3 into the cableing or an
on /off cycle solved the problem (just moving at the ptt-cable or
connector).
Right now it starts with err-ptt ( without any cableing but 12v ;O) ).
Resistance between ptt and ground is 25 ohms.

Someone had this problem (solved?) before?
I really don't trust this cinch-stuff

Any hints for further investigation ?

Regards from northern germany,
Holger DL6ABM



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3]Err Ptt

Jorge Diez - CX6VM
Hi Holger,

Try another better connector.

I had this problem with a cheap one and try another one and all was OK

73,
Jorge
CX6VM

-----Mensaje original-----
De: [hidden email]
[mailto:[hidden email]] En nombre de Holger Meinecke
Enviado el: Martes, 31 de Agosto de 2010 04:21 p.m.
Para: [hidden email]
Asunto: [Elecraft] [K3]Err Ptt

Hi elecrafters,

i have the following problem with k3 2121:

I'm using external ptt-in (backside of the K3).
At first rarely in qso the trx didn't go back to rx-mode after sending.
Usually a blind grip at the backside of the k3 into the cableing or an
on /off cycle solved the problem (just moving at the ptt-cable or
connector).
Right now it starts with err-ptt ( without any cableing but 12v ;O) ).
Resistance between ptt and ground is 25 ohms.

Someone had this problem (solved?) before?
I really don't trust this cinch-stuff

Any hints for further investigation ?

Regards from northern germany,
Holger DL6ABM



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html