hi Wayne,
On 4 May 2008 at 11:48, wayne burdick wrote:
> > Will TX EQ be made mode and/or input dependent? Setting TX EQ
> > for voice screws up the audio response for digital mode (AFSK A and
> > DATA A) operation. The same is true for RX EQ.
>
> I believe both RX and TX EQ are bypassed in DATA modes. If not, they
> should be. I'll mention this to Lyle.
>
> Per-mode settings are on the list, too.
I have two different micophones, one needs heavy TX EQ correction, the
other one is good with neutral settings. Is it possible to store a profile for
this? Settings per input would not help in my case, because I connect both
microphones on the rear connector.
You will ask, why do I use a different microphone? The reason is I cannot
bear the good one (headset) for a long time, and sometimes have to change
it because my ears hurt. And the small headset which needs correction is
the choice for portable use.
73! de Werner
OE9FWV
--
I have seen the truth and it makes no sense.
PGP-Key: <
http://www.qsl.net/oe9fwv/furlan.asc>
Fone +43 5522 75013
Fax +43 820 555 85 2621
Mobile +43 664 6340014
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
