K3 - FM deviation

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 - FM deviation

Edward R Cole
I've had complaints my FM signal is low in audio (which implies low
deviation).  Mic gain control is inoperative in FM mode (turned up to
60 with no change).  I checked CONFIG: FM DEV and it is set to 5.0
KHz.  It can be raised to 6.0 but I haven't changed it as that seems
not the proper way to raise transmit audio.  I'm guessing this
setting is fixed at the factory.

I have no RF level issues: signal is full quieting on FM.  Even
yelling into the mic with my lips touching the mic makes no
difference (according to the listener).

Is there an epot to control this or hard pot inside the radio?


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep [hidden email]
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 - FM deviation

John Lemay
Ed

Same here. It's an issue that was raised many moons ago and I believe that
Elecraft made some software changes to address this. In my humble opinion,
it's nowhere near right yet.

John G4ZTR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Edward R. Cole
Sent: 25 February 2012 21:25
To: [hidden email]
Subject: [Elecraft] K3 - FM deviation

I've had complaints my FM signal is low in audio (which implies low
deviation).  Mic gain control is inoperative in FM mode (turned up to
60 with no change).  I checked CONFIG: FM DEV and it is set to 5.0
KHz.  It can be raised to 6.0 but I haven't changed it as that seems
not the proper way to raise transmit audio.  I'm guessing this
setting is fixed at the factory.

I have no RF level issues: signal is full quieting on FM.  Even
yelling into the mic with my lips touching the mic makes no
difference (according to the listener).

Is there an epot to control this or hard pot inside the radio?


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep [hidden email]
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6915 (20120225) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6915 (20120225) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html