I had a similar problem like this when using a SoundBlaster X G1 sound device. I solved it by only transmitting on one channel. If I use BOTH channels on output, it would do this weirdness.
Don’t know if that helps you or not.
> On Jan 4, 2021, at 9:58 AM, john <
[hidden email]> wrote:
>
> Had a transmit problem with both FT4 and FT8 this weekend during the RTTY RU contest. The data would transmit for a couple seconds (heard it in the monitor, and saw output power), then the data stops. The K3 stays in transmit (Red TX light) for the whole TX period, so I think the PTT configuration is working. I was using it in conjunction with N1MM, but closed N1MM and used WSJTx standalone, and had the same problem. Appreciate any ideas.
> - 73, John, N0TA
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
Bill Coleman, AA4LR, PP-ASEL Mail:
[hidden email]
Web:
http://boringhamradiopart.blogspot.comQuote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
