On May 4, 2008, at 4:52 PM, John Reiser wrote:
> With FW v.1.87 my K3 # 387 produces 70 watts peak out for 100 watts
> asked for. In CW or tuning mode, I get 100 watts for 100 watts
> requested. The meter is a Diamond SX-200. I re-did the calibration
> of the K3 ar 5 and 50 watts. The K3 and SX-200 agree. FWIW
John,
We'll have an update shortly that fixes CONFIG:TXG VCE. I find that a
setting of 1.0 to 1.5 dB in this menu entry is needed with some 2.7 or
2.8 kHz crystal filters. The goal is to make voice peak power closer to
that of CW or TUNE. You can then fine-tune the level using the PWR
control.
73,
Wayne
N6KR
---
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
