Mike,
I always put a dummy load on the unused antenna connector for that very
reason. Adds a margin of safety for FD and demo events.
73,
Don W3FPR
On 6/28/2014 2:47 AM, Michael Eberle wrote:
> For a K3 used during Field Day, the power, compression, and mic gain
> can be locked by pressing 1 from the PWR SET menu. I was wondering if
> there is a way to lock the antenna selection on radios which have the
> KAT2 installed? If not maybe this could be added to a future firmware
> update by pressing 2 from the PWR SET menu. My concern is that a FD
> operator may accidentally press the ANT button when they meant to
> press ATU TUNE and switch to the unused antenna port. This may cause
> half an hour or more of trying to troubleshoot the antenna.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
