[K3] Filter normalization

[Raymond METZGER]

Hi Elecrafters,

The K3 Operating Manual says, page 24 (e.g. D7 release) :
>  Whenever you normalize the filter passband, two small wings appear at the
left and right ends of the DSP filter passband graphic.
>  Moving any DSP control makes the "wings" disappear.

On  my k3 the wings stay permanently. Is there a problem with my K3 or with
the Manual ?

73, Raymond, F4FNT




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Raymond METZGER]

Thank you, Andrew for your prompt answer.
You're right and I apologize for my stupid question.

 

Raymond, F4FNT

K3 #0615

 

De : Andrew Moore [mailto:[hidden email]]
Envoyé : mardi 7 septembre 2010 20:49
À : Raymond METZGER
Objet : Re: [Elecraft] [K3] Filter normalization

 

Hi Raymond:

> On  my k3 the wings stay permanently. Is there a problem with my K3 or with

Are you sure you aren't confusing the two upward-pointing triangles with wings?  The triangles are under the horizontal bar; the wings are off the endpoints.
The wings will not appear if you are in Dual Passband mode.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html