K3 Firmware 4.05

[Chester Alderman]

While I have found that QRQ works excellent with both 4.03 and 4.05 firmware
versions, I think I have a new problem with 4.05. I have programmed QRQ
ON/OFF into the PF1 button. In addition to the fully explained RIT/XIT/Split
issues, now when I execute QRQ ON, my HIGH CUT/WIDTH buttons switch from
LO/HI to SHIFT/WIDTH. When I tap the SHIFT knob, FC *0.58 is displayed in
the VFO B area. When I tap the WIDTH knob, BW  0.40 displays in the VFO B
area. I can no longer get either of these knobs to revert back to LO/HI.
Once I turn QRQ to OFF, those buttons go back to 'normal' operation.
NOTE: Having just received my K3 (s/n 4521) on Monday 8/2, it is entirely
possible I have something else set incorrect or have not read about this
issue with 4.xx firmware.
Tom - W4BQF




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Steve Ellington]

Tom:

Yep....That's the way it's supposed to work or at least until they make more
refinements. When in QRQ mode, the Shift knob doesn't change anything.
I'm still waiting for RIT to start working when in QRQ mode.
Steve
N4LQ
----- Original Message -----
From: "Tommy Alderman" <[hidden email]>
To: <[hidden email]>
Sent: Wednesday, August 04, 2010 12:29 PM
Subject: [Elecraft] K3 Firmware 4.05

> While I have found that QRQ works excellent with both 4.03 and 4.05
> firmware
> versions, I think I have a new problem with 4.05. I have programmed QRQ
> ON/OFF into the PF1 button. In addition to the fully explained
> RIT/XIT/Split
> issues, now when I execute QRQ ON, my HIGH CUT/WIDTH buttons switch from
> LO/HI to SHIFT/WIDTH. When I tap the SHIFT knob, FC *0.58 is displayed in
> the VFO B area. When I tap the WIDTH knob, BW  0.40 displays in the VFO B
> area. I can no longer get either of these knobs to revert back to LO/HI.
> Once I turn QRQ to OFF, those buttons go back to 'normal' operation.
> NOTE: Having just received my K3 (s/n 4521) on Monday 8/2, it is entirely
> possible I have something else set incorrect or have not read about this
> issue with 4.xx firmware.
> Tom - W4BQF
>
>
>
>

--------------------------------------------------------------------------------


> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Guy, K2AV]

>From a post of his, Wayne is working on adding a "few hundred Hertz of
RIT" to the CW QRQ mode.  Availability unknown of course.

73, Guy.

On Wed, Aug 4, 2010 at 1:42 PM, Steve Ellington <[hidden email]> wrote:

> Tom:
>
> Yep....That's the way it's supposed to work or at least until they make more
> refinements. When in QRQ mode, the Shift knob doesn't change anything.
> I'm still waiting for RIT to start working when in QRQ mode.
> Steve
> N4LQ
> ----- Original Message -----
> From: "Tommy Alderman" <[hidden email]>
> To: <[hidden email]>
> Sent: Wednesday, August 04, 2010 12:29 PM
> Subject: [Elecraft] K3 Firmware 4.05
>
>
>> While I have found that QRQ works excellent with both 4.03 and 4.05
>> firmware
>> versions, I think I have a new problem with 4.05. I have programmed QRQ
>> ON/OFF into the PF1 button. In addition to the fully explained
>> RIT/XIT/Split
>> issues, now when I execute QRQ ON, my HIGH CUT/WIDTH buttons switch from
>> LO/HI to SHIFT/WIDTH. When I tap the SHIFT knob, FC *0.58 is displayed in
>> the VFO B area. When I tap the WIDTH knob, BW  0.40 displays in the VFO B
>> area. I can no longer get either of these knobs to revert back to LO/HI.
>> Once I turn QRQ to OFF, those buttons go back to 'normal' operation.
>> NOTE: Having just received my K3 (s/n 4521) on Monday 8/2, it is entirely
>> possible I have something else set incorrect or have not read about this
>> issue with 4.xx firmware.
>> Tom - W4BQF
>>
>>
>>
>>
>
>
> --------------------------------------------------------------------------------
>
>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html