K3 Firmware CR

[K5DNL]

Hello Elecraft,

I would like to request a change in the firmware that would allow me
to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ )
I would like to use the K3 as an IF on 80 meters.
My LO is running at 3.5 mhz
Its easier to build a stable oscillator on 3.5 MHZ than the higher bands.

Thanks for all the nice Elecraft products .
73 Ken K5DNL



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John Hendricks-2]

I would also like to see a 10 MHz if option for my VLF transverter.

John Hendricks K7JLT

On May 8, 2013, at 15:04, Ken Roberson <[hidden email]> wrote:

> Hello Elecraft,
>
> I would like to request a change in the firmware that would allow me
> to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ )
> I would like to use the K3 as an IF on 80 meters.
> My LO is running at 3.5 mhz
> Its easier to build a stable oscillator on 3.5 MHZ than the higher bands.
>
> Thanks for all the nice Elecraft products .
> 73 Ken K5DNL
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html