Hi, Fred. Please try the instructions in K3 Utility Help, Troubleshooting
MCU load failure. It has a step by step to get through this.
I presume you're using a straight cable, not through something like a
microHAM router, right?
73 de Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Cady, Fred
Sent: Friday, February 18, 2011 1:27 PM
To:
[hidden email]
Subject: [Elecraft] K3 Firmware load failure
Well I got the K3 into a weird state and can't load the firmware.
Follow directions in K3 Utility help to force firmware load and subsequently
get this message:
MCU firmware file hmcu0414.hex verified
K3 MCU Bootstrap Loader did not echo "D"
Remove K3 power and retry firmware load
Error code xE2000011, Bootstrap Loader did not echo a D MCU firmware load
failed Click "Close" to close this window
Help!
Fred
KE7X
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html