N4ZR sed:
> When I jump to a Reverse Beacon
> Network spot (on CW), the perceived audio tone of the station's CW is
> almost always higher than where I have my Pitch set, so in order to
> center the signal, I wind up tuning up-frequency perhaps 100-200 Hz.
It sounds like you are using the alternate CW setting (USB CW), rather
than the default (LSB CW). And it also sounds like you're using a
pitch other than the default.
You might want to try the RBN with the default pitch, with the
default LSB CW, or both.
73, Paul W8TM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
