Yes, this is a known issue that I'll try to get to in the near future.
Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of G3XDY
Sent: Thursday, October 04, 2012 9:48 AM
To:
[hidden email]
Subject: [Elecraft] K3 Frequency Memory Editor Software bug
Can anyone confirm a problem I seem to be having with the K3 Frequency
Memory Editor software?
If I try to set memory frequencies for transverters in the XVn memories
above 2.3GHz I get an error message, and if I set a memory directly on the
K3 and then read it back with the utility it shows up as a frequency that
has no obvious relationship to that set on the K3. This seems to be the case
for any band above 2.3GHz. A previous version of the utility worked OK on
2.3 and 3.4GHz but failed on 5.7GHz and above, and the error message with
that version makes me think its an overflow in a 32 bit integer variable
used to represent the frequency.
73
John G3XDY
K3 #00689
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
