[K3] Front and Read Mic Gain are the same

[Randy Moore]

I just (re)discovered that the Mic Gain (set with MIC SEL > Tap [1]) is
the same for both front and rear mic selections.  This is a bit
inconvenient when switching back and forth between very different mics.  
Is this on "the list"?  Or have I missed something?

73 and Happy Memorial Day (USA),
Randy, KS4L
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[George Danner]

Randy,
I use macros for PF1 & PF2 to switch between the front & rear microphones.
The macro can turn bias on/off , set gain and sensitivity (H/L). Some users
also use their macro to also set the frequency response diferently for the 2
microphones as well.
George
AI4VZ

-----Original Message-----
I just (re)discovered that the Mic Gain (set with MIC SEL > Tap [1]) is
the same for both front and rear mic selections.  This is a bit
inconvenient when switching back and forth between very different mics.
Is this on "the list"?  Or have I missed something?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html