K3-Ham Radio Deluxe question

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3-Ham Radio Deluxe question

Bill Davis Jr

  Started using HRD 4.1 build 2321 and with my K3. When trying to use it with the 10Ghz transverter the frequency display on HRD is "bogus" and freq control fails. So does HRD have an upper feq limit. Worked ok on 1296Mhz, one digit less.

  Thanks

Thanks  Bill  K0AWU  EN37ed
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3-Ham Radio Deluxe question

Julian, G4ILO

Bill Davis Jr wrote
  Started using HRD 4.1 build 2321 and with my K3. When trying to use it with the 10Ghz transverter the frequency display on HRD is "bogus" and freq control fails. So does HRD have an upper feq limit. Worked ok on 1296Mhz, one digit less.
I don't know the answer to that but it would be easy to check. Set the rig to 10GHz then open the K3 Utility go to the Terminal page and send the command FA;  This is the command HRD would use to get the rig's frequency. You should get a response FA followed by an 11 digit number, the frequency in Hz. If the frequency is correct, HRD is not displaying it correctly.
Julian, G4ILO. K2 #392  K3 #222 KX3 #110
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
Reply | Threaded
Open this post in threaded view
|

Re: K3-Ham Radio Deluxe question

ww2r2
In reply to this post by Bill Davis Jr
Bill

The K3 reports correctly up to 24999.999MHz. I am currently using mine on
24048.2MHz. Whereas Writelog uses this information appropriately I also have
never managed to get hrd4.1 to display it sensibly

Dave

G4fre
------------------------------

Message: 33
Date: Tue, 15 Dec 2009 21:11:14 -0600
From: Bill Davis Jr <[hidden email]>
Subject: [Elecraft] K3-Ham Radio Deluxe question
To: Elecraft Mailer <[hidden email]>
Message-ID: <[hidden email]>
Content-Type: text/plain; charset="iso-8859-1"


  Started using HRD 4.1 build 2321 and with my K3. When trying to use it
with the 10Ghz transverter the frequency display on HRD is "bogus" and freq
control fails. So does HRD have an upper feq limit. Worked ok on 1296Mhz,
one digit less.

  Thanks

Thanks  Bill  K0AWU  EN37ed



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html