Problem solved, my lack of a detailed reading of the calibration steps was the culprit, when I Looked Up "Calibration" and did those steps on the main and sub, working great.
73,
Al
W6GBG
----- Original Message ----
From: Allan Bacon <
[hidden email]>
To:
[hidden email]
Cc: Allan Bacon <
[hidden email]>
Sent: Sunday, February 15, 2009 9:17:44 PM
Subject: [Elecraft] K3 Help with KRX3 Installation PL2 Error?
K3 #2252 Factory built, now adding KRX3. Do not want an exotic setup, just want to listen on one frequency and transmit on another - same band, same antenna.
Completed installation with no problem, Used good static mat and wrist strap. Uploaded latest firmware. Unsed Config Menu to initialize as ANT-BMC (seemed like the default I wanted to use) . Do not have a TMP cable plugged in to J92, as I believe this is how to keep it simple for what I want to do.
Per troubleshooting chart on a PL2 Error, I tried recalibrating the VCO with VCO (CONGIG:VCO:MD), taped SBU, screen showed 255, and SUB starts flashing slowly. Rebooted, Still get PL2 Error.
VFO A and B seem to work fine
Looking for help please -
73,
Al
W6GBG
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
