K3 Hi SWR when sending CW

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 Hi SWR when sending CW

vk4tux
http://hamgineer.blogspot.com.au/2012/05/swr-changes-when-i-increase-my-tran
smit.html

Testing fwd & ref pwr ratios with a Bird 43 at both pwr levels would be
interesting for a better comparison;

http://www.bird-technologies.com/~/media/Bird/Files/PDF/Products/manuals/920
-43.ashx

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 Hi SWR when sending CW

Barry
The first link is particularly relevant.  My antenna is on a balcony, surrounded by metal.  Metal railing, making up cap to balcony wall several feet below wires.  Metal mesh in building wall (stucco), about 5 feet away.  Commercial grade metal studs in building walls.

Guess that's why the current balun didn't work.  Moving the antenna is not an option.

Barry W2UP
Reply | Threaded
Open this post in threaded view
|

Re: K3 Hi SWR when sending CW

Vic Rosenthal
Three suggestions:

1) Add a choke balun close to the rig.
2) Add 10' piece of coax to feedline.
3) Add 1/4 wave wire from ground terminal of radio to establish ground reference (about
10' for 12 meters). Be sure it is insulated, and end should not be accessible to people or
animals.

You can do all of these if necessary.

On 10/5/2012 4:24 AM, Barry wrote:
> The first link is particularly relevant.  My antenna is on a balcony,
> surrounded by metal.  Metal railing, making up cap to balcony wall several
> feet below wires.  Metal mesh in building wall (stucco), about 5 feet away.
> Commercial grade metal studs in building walls.
>
> Guess that's why the current balun didn't work.  Moving the antenna is not
> an option.
>
> Barry W2UP

--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html