K3 - IF out - again
Locked
 
|
Subject: [Elecraft] K3 - IF out
Next stupid question, What is the output level of the IF out on the transverter KXV3 option? Do I have to turn on something to get it to activate? I am trying to connect a K3 Softrock V6.2 to use as a panadapter and cannot see any output on my scope (techtronics 475) from the IF output connector on the K3. Thanks es 73, de Jim KG0KP _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Jim
The level is very low, you are unlikely to see it on a scope, it can be seen on a spectrum analyser. 73 Dave, G4AON K3/100 #80 ----------------------- What is the output level of the IF out on the transverter KXV3 option? Do I have to turn on something to get it to activate? I am trying to connect a K3 Softrock V6.2 to use as a panadapter and cannot see any output on my scope (techtronics 475) from the IF output connector on the K3. Thanks es 73, de Jim KG0KP _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by hf4me
I've provided a lengthy study of the K3's IF output port at
http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm Jack Jim Miller wrote: > Subject: [Elecraft] K3 - IF out > > > Next stupid question, > > What is the output level of the IF out on the transverter KXV3 option? > Do I have to turn on something to get it to activate? > > I am trying to connect a K3 Softrock V6.2 to use as a panadapter and cannot > see any output on my scope (techtronics 475) from the IF output connector on > the K3. > > Thanks es 73, de Jim KG0KP > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Thanks Dave, Jack and Jerry,
I've got some reading to do. I am not getting any signal out of the chip that clocks in the IF signal and drives the signal to the sound card. 73, Jim KG0KP ----- Original Message ----- From: "Jack Smith" <[hidden email]> To: "Jim Miller" <[hidden email]> Cc: "Elecraft Reflector" <[hidden email]> Sent: Wednesday, September 10, 2008 5:04 AM Subject: Re: [Elecraft] K3 - IF out - again > I've provided a lengthy study of the K3's IF output port at > http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm > > Jack > > > Jim Miller wrote: > > Subject: [Elecraft] K3 - IF out > > > > > > Next stupid question, > > > > What is the output level of the IF out on the transverter KXV3 option? > > Do I have to turn on something to get it to activate? > > > > I am trying to connect a K3 Softrock V6.2 to use as a panadapter and > > see any output on my scope (techtronics 475) from the IF output connector on > > the K3. > > > > Thanks es 73, de Jim KG0KP > > _______________________________________________ > > Elecraft mailing list > > Post to: [hidden email] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [hidden email] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
If you have another receiver handy that can tune 8.2 MHz, use it to
sniff at the K3 IF out. I think the signals are in the microvolt range. Jerry W4UK At 09:57 AM 9/10/2008, Jim Miller wrote: >Thanks Dave, Jack and Jerry, > >I've got some reading to do. I am not getting any signal out of the chip >that clocks in the IF signal and drives the signal to the sound card. > >73, Jim KG0KP > >----- Original Message ----- >From: "Jack Smith" <[hidden email]> >To: "Jim Miller" <[hidden email]> >Cc: "Elecraft Reflector" <[hidden email]> >Sent: Wednesday, September 10, 2008 5:04 AM >Subject: Re: [Elecraft] K3 - IF out - again > > > > I've provided a lengthy study of the K3's IF output port at > > http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm > > > > Jack > > > > > > Jim Miller wrote: > > > Subject: [Elecraft] K3 - IF out > > > > > > > > > Next stupid question, > > > > > > What is the output level of the IF out on the transverter KXV3 option? > > > Do I have to turn on something to get it to activate? > > > > > > I am trying to connect a K3 Softrock V6.2 to use as a panadapter and >cannot > > > see any output on my scope (techtronics 475) from the IF output >connector on > > > the K3. > > > > > > Thanks es 73, de Jim KG0KP > > > _______________________________________________ > > > Elecraft mailing list > > > Post to: [hidden email] > > > You must be a subscriber to post to the list. > > > Subscriber Info (Addr. Change, sub, unsub etc.): > > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > > > Help: http://mailman.qth.net/subscribers.htm > > > Elecraft web page: http://www.elecraft.com > > > > > > _______________________________________________ > > > Elecraft mailing list > > > Post to: [hidden email] > > > You must be a subscriber to post to the list. > > > Subscriber Info (Addr. Change, sub, unsub etc.): > > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > > > Help: http://mailman.qth.net/subscribers.htm > > > Elecraft web page: http://www.elecraft.com > > > > > > > > > >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |