K3 IF setup with SDRPlay and HDSRD

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 IF setup with SDRPlay and HDSRD

Elecraft mailing list
I'm trying to set-up a SDRPlay using my K3 IF Out and HDSRD software.  I
spent six hours yesterday trying to figure out how to make the three of
these play together.

 

Does anyone have any detailed setup instruction for this combination?

 

As of yet I'm been unable to get the K3 IF Data feeding into HDSRD.

 

Any help would be great.

 

Thanks and 73 Bill  W4RM

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 IF setup with SDRPlay and HDSRD

Joe Subich, W4TV-4

As sent to you by "[hidden email]" but apparently blocked by
AOL:

> Follow the HDSDR documentation to set up the "CAT to Radio
> (Omni-Rig)" port.  Connect it to the 2nd CAT port in Router.
> Configure the IF Offsets, etc. in "Options | RF Front-End and
> Calibration.
>
> I have no specific documentation for HDSDR but had not problem
> configuring either my SDR-IQ or SoftRock/sound card using the
> documentation available with HDSDR. See the documentation from the
> developer of HDSDR (such as it is) and contact the SDRPlay support
> team for specifics on their hardware/software.
>
> 73,
>
> ... Joe Subich, W4TV
>     microHAM America, LLC.
>     http://www.microHAM-USA.com
>     http://groups.yahoo.com/group/microHAM
>
>     [hidden email]
>



On 7/8/2016 8:48 AM, Bill OMara via Elecraft wrote:

> I'm trying to set-up a SDRPlay using my K3 IF Out and HDSRD software.  I
> spent six hours yesterday trying to figure out how to make the three of
> these play together.
>
>
>
> Does anyone have any detailed setup instruction for this combination?
>
>
>
> As of yet I'm been unable to get the K3 IF Data feeding into HDSRD.
>
>
>
> Any help would be great.
>
>
>
> Thanks and 73 Bill  W4RM
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]