[K3] Intermitent Keying

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

[K3] Intermitent Keying

David Guernsey
My K3/10 intermittently goes into xmit without my pushing the PTT.  Operating on 80 meter band (3.952 MHz) LSB.  Any ideas from anybody would be appreciated.

 
73 de Dave KJ6CBS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3] Intermitent Keying

Don Wilhelm-4
Dave,

Any chance that you have VOX turned on?  That may allow noise to send
the K3 into transmit.  Yes, PTT works even if VOX is selected.

73,
Don W3FPR

On 8/2/2012 9:40 PM, David Guernsey wrote:
> My K3/10 intermittently goes into xmit without my pushing the PTT.  Operating on 80 meter band (3.952 MHz) LSB.  Any ideas from anybody would be appreciated.
>
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3] Intermitent Keying

David Guernsey
Thanks Don.  I must have accidentally turned the VOX on.  Turned it off and problem went away.  Prior to turning VOX off, I was getting ERR KEY in the VFO B part of the LED display.  Hopefully the VOX was the problem.

 
73 de Dave KJ6CBS


________________________________
 From: Don Wilhelm <[hidden email]>
To: David Guernsey <[hidden email]>
Cc: Elecraft List <[hidden email]>
Sent: Thursday, August 2, 2012 6:44 PM
Subject: Re: [Elecraft] [K3] Intermitent Keying
 
Dave,

Any chance that you have VOX turned on?  That may allow noise to send the K3 into transmit.  Yes, PTT works even if VOX is selected.

73,
Don W3FPR

On 8/2/2012 9:40 PM, David Guernsey wrote:
> My K3/10 intermittently goes into xmit without my pushing the PTT.  Operating on 80 meter band (3.952 MHz) LSB.  Any ideas from anybody would be appreciated.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html