Hi Jim,
do you by chance also have the K144RFLK board installed? Then no offset is
needed as the reference lock takes care of (no) frequency offsets.
73, Olli - DH8BQA
----- Original Message -----
From: "Jim Spears" <
[hidden email]>
To: <
[hidden email]>
Sent: Thursday, January 31, 2013 1:23 PM
Subject: [Elecraft] [K3 - K144XV] frequency offset???
>I just installed a K144XV in K3/100 s/n 2295, I entered the frequency
> offsets for the two segments as printed on the module. The first time I
> tried to listen to a 2m repeater in either segment, I found the frequency
> to
> be off. working with Ken, K3IU, we decided to zero out the offsets and
> the
> repeater frequency displayed on the rig allowed the repeater output to be
> sharp and clear. Is this normal? Has anyone else encountered this
> phenomenon?
>
>
>
> Jim/N1NK
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
> -----
> E-Mail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 2013.0.2890 / Virendatenbank: 2639/6066 - Ausgabedatum:
> 29.01.2013
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html