Dennis- great summary. I wish I had seen earlier. My trouble with WSPR not changing freqs was due to have an incorrect Handshake setting ( hardware vs. none). My K3/Signalink USB/ all digital programs are now functioning in all aspects.
73 Paul
kc2nyu
Message: 7
Date: Wed, 16 Jan 2013 15:22:55 -0800
From: Dennis Moore <
[hidden email]>
To: Elecraft Reflector <
[hidden email]>
Subject: [Elecraft] K3 WSPR settings that work for me
Message-ID: <
[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
There are various discussions both on and off this list about how to set
up the K3 with the Signalink USB when using WSPR, but I ran into a
problem with the K3 staying in XMIT after sending was complete.
Solutions were available online, just none that solved my issue. These
settings got my K3 working on WSPR. The setup listed for the K3 and
Signalink are also working with RMS Express and DM-780.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
