K3/K3s with SubRx with DXE NCC-2 hookup

[Gary Smith-2]

I couldn't take the Line noise &
neighbor's RFI any more so I bought one of
the new & very pricey NCC-2 phase units
from DXE.

I have the TX antenna & a HI-Z 8 element
Rx ant & a 3 element Rx. I can use a coax
switch to choose between the two Rx
antennas but with the K3Ss/K3 with subRx I
have the RX in/ant out and the Aux RF
input for the SubRx.

The manual is pretty straightforward but
they don't have a block diagram for
something like the K3s with SubRX /
Diversity, using the Aux RX jack. DXE has
it figured for most radios and I can set
up the K3s like that as well, but has
anyone using the NCC-2 figured the most
effective way to get diversity and also
best utilize the NCC-2?

If all else fails I can just connect the
triangular to the Aux RF jack and use the
8 element for phase adjustment. Using the
NCC-2 is new to me.


Thanks & 73,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]