Last evening, after some advice from WB9CIF, I did a little more testing
and found that the KAT3 would do nothing regardless of Antenna port or what
actual antenna was selected.
I went into Config and told the K3 there was no tuner. Cycled the rig and
then told the K3 that the tuner was installed and set to Auto.
Now everything works as it should. Glad that's resolved and it wasn't the
antenna on the tower in a Michigan upcoming winter.
Larry, KN8N
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
