K3 KAT3

[Ken817821]

Thanks for replies on 8 pole xtals offset = 0.
 
Now, it seems I have a packing mistake.
I have the KAT3, but only one SO239 was shipped.  I installed it at ANT1.
In the KAT3 packet, I find the KAT3 circuit board, the install instructions, and a packet of hardware labled "hardware for KPA3".  It appears it was packed instead of the additional SO239.


Ken K5WK
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Arie Kleingeld PA3A]

Ken,

I built my K3 10 days ago. There is one so239 in the KPA3 bag. But
there's another one in another bag. I don't remember which one it was
packed in but I found it. You'll find it too.

73
Arie PA3A

-----Oorspronkelijk bericht-----
Van: [hidden email]
[mailto:[hidden email]] Namens Kenneth Waites
Verzonden: dinsdag 19 augustus 2008 5:18
Aan: [hidden email]
Onderwerp: [Elecraft] K3 KAT3


Thanks for replies on 8 pole xtals offset = 0.
 
Now, it seems I have a packing mistake.
I have the KAT3, but only one SO239 was shipped.  I installed it at
ANT1. In the KAT3 packet, I find the KAT3 circuit board, the install
instructions, and a packet of hardware labled "hardware for KPA3".  It
appears it was packed instead of the additional SO239.


Ken K5WK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com