K3 KDVR3 Digital Voice Recorder

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 KDVR3 Digital Voice Recorder

WU9B
During the 7QP this past weekend my KDVR3 Digital Voice Recorder would upon occasion provide no audio while the transmitter was keyed. I was using N1MM Logger and I do not recall doing anything that might have interrupted the KDVR3  Digital Voice Recorder such as tapping my foot switch while the software had already keyed the transmitter or hitting any additional keys on the keyboard. I found that the only way to get the KDVR3 Digital Voice Recorder back to normal operation was to turn off the K3 and then of course to turn it on again. I hope this is just some kind of cockpit error on my part. I don't recall any such discussions in recent history so please comment if you can...

73, Steve WU9B

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 KDVR3 Digital Voice Recorder

N7US
Steve,

I had the same problem, though it was intermittent.  In my case, once the
radio heated up the recording would be truncated, first a little, eventually
playing only the first couple of seconds.

Elecraft swapped out the KDVR, and it's been OK since.

(OT - I spent many hours riding my bicycle up and, less, riding down Rio
Verde Drive, just south of you, and my cousin manages the Rio Verde stables
just SE of you.)

Jim N7US



-----Original Message-----

During the 7QP this past weekend my KDVR3 Digital Voice Recorder would upon
occasion provide no audio while the transmitter was keyed. I was using N1MM
Logger and I do not recall doing anything that might have interrupted the
KDVR3  Digital Voice Recorder such as tapping my foot switch while the
software had already keyed the transmitter or hitting any additional keys on
the keyboard. I found that the only way to get the KDVR3 Digital Voice
Recorder back to normal operation was to turn off the K3 and then of course
to turn it on again. I hope this is just some kind of cockpit error on my
part. I don't recall any such discussions in recent history so please
comment if you can...

73, Steve WU9B



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html